Students are required to work in groups of up to 4. While working in a specific group, students are required to apply their knowledge learned in Online Pre-recorded Lectures, Additional Materials and Interactive Tutorial Sessions of this course unit to write a report (Learning Outcomes 1, 2, 3, 4).

(i) Students are required to work in groups of up to 4. While working in a
specific group, students are required to apply their knowledge learned in
Online Pre-recorded Lectures, Additional Materials and Interactive Tutorial
Sessions of this course unit to write a report (Learning Outcomes 1, 2, 3, 4).
(ii) Also, students may choose to work as individual. In this regard, contact the
Unit Coordinator specifying that you are working on your Group Assignment
as INDIVIDUAL and not group.
(iii) Finally, students should form their respective groups in the BB as
INDIVIDUAL or GROUP of: 2 members or 3 members or 4 members
maximum.

find the cost of your paper

set up and solve a case-study example of the light-intensity distribution in a photochemical reactor.

Photochemical reactor modeling: a case-study problem. Although radiation is important in heat transfer, an analogous model can be used in the design of photochemical reactors. The modeling of these reactors….

Write a critique on this technique of secondary-emission measurement.

Secondary-emission measurement: a case-study problem. An indirect way of measuring of secondary emission from ponds or large bodies of water used in waste treatment is to measure the concentration and….

set up a mass transfer model and evaluate the variation of the local mass transfer coefficient at various locations in the plate.

Chemical vapor deposition (CVD) on an inclined susceptor: a case-study problem. An important application of convective mass transfer theory is in CVD processes employed to coat surfaces with thin films….