Find the minimum film thickness for a bearing with these data: 30-mm dia, 25 mm long, 0.0015 clearance ratio, 1 500 rpm, ON = 30, ISO VG 220 oil at 200°F.

1.       Problem 7-12 estimated the volume of adhesive wear to expect from a steel shaft of 40 mm dia rotating at 250 rpm for 10 years in a plain bronze bushing with a transverse load of 1 000 N for conditions of both poor and good lubrication. If the bushing has l / d = 0.5 and a clearance ratio of 0.001, define the lubricant viscosity in microreyn (μreyn) needed to obtain good lubrication.

2.       Find the minimum film thickness for a bearing with these data: 30-mm dia, 25 mm long, 0.0015 clearance ratio, 1 500 rpm, O= 30, ISO VG 220 oil at 200°F.

find the cost of your paper

  Discuss in detail how the mechanical and magnetic properties of nanomaterials vary with particle size.

1.       Explain with a suitable example, the synthesis of nanostructured materials employing self-assembly, self-organisation and template-based methods. 2.       Discuss in detail how the mechanical and magnetic properties of nanomaterials vary….

  Explain the main purpose of interpoles in DC machine.

1.       Explain the main purpose of interpoles in DC machine. 2.       Why tapering of interpoles is carried out in a DC machine? 3.       Provide the specifications of DC machine. 4.      ….

Discuss about “active copper” and “inactive copper” in the design of DC machine.

1.       Mention the location and use of compensating winding in DC machine. Compensating winding is placed under the pole shoe of DC machine that is used to prevent the distortion….