Dronautics Ltd., a drone manufacturer operating across three manufacturing sites across Australia, has experienced a big surge in demand for their products over the past few years. Table 1 shows the current year’s demand information for 12 markets across Australia.

Dronautics Ltd., a drone manufacturer operating across three manufacturing sites across Australia, has experienced a big surge in demand for their products over the past few years. Table 1 shows the current year’s demand information for 12 markets across Australia.
Dronautics is currently manufacturing in Cairns (QLD), Darwin (NT), and Mandurah (WA). There are two distribution centres in its supply network, one in Adelaide (SA), and one in Newcastle (NSW). The company demands all products to go though the distribution centres for operational consistency.
Currently the unit production costs across the three manufacturing plants are $43/unit in Cairns, $40/unit in Darwin, and $42/unit in Mandurah.

find the cost of your paper

set up and solve a case-study example of the light-intensity distribution in a photochemical reactor.

Photochemical reactor modeling: a case-study problem. Although radiation is important in heat transfer, an analogous model can be used in the design of photochemical reactors. The modeling of these reactors….

Write a critique on this technique of secondary-emission measurement.

Secondary-emission measurement: a case-study problem. An indirect way of measuring of secondary emission from ponds or large bodies of water used in waste treatment is to measure the concentration and….

set up a mass transfer model and evaluate the variation of the local mass transfer coefficient at various locations in the plate.

Chemical vapor deposition (CVD) on an inclined susceptor: a case-study problem. An important application of convective mass transfer theory is in CVD processes employed to coat surfaces with thin films….