Determine the original supply rates and supply rates with interconnectionto centres B and D.

Task 1

Consider the following situation that had happened 3km away from the Kandy city.

Two adjacent city centres B and D receive water from separate sources A and C. The water level in A is 4 m above that in C. Reservoir A supplies city centre B by 0.4 m diameter pipe of 3000 m length with a level difference of 10 m. City centre D’s is supplied by reservoir C through a 4000 m long pipe of 0.45 m diameter, with a level difference of 15 m. After sometime it is found that centre B has excess water while centre D is starved.

Your company has come up with a solution to this issue.

They have proposed to interconnect these lines and draw 100 l/s from the line A to B. The junction on AB is at a distance of 2000 m from A. The junction CD is at 3000 m from C.

1) Determine the original supply rates and supply rates with interconnectionto centres B and D. Also determine

the diameter of the interconnecting pipe, if the length is 1500 m Friction factor, f = 0.01 in all cases.

Compare the results and evaluate the feasibility of the proposed solution.

 

Figure 1- Pipe Supply

 

2) Also, a compound manometer is used to measure the pressure in a pipe E carrying water. The dimensions are shown in the figure below. Determine the pressure in the pipe.

 

 

Figure 2- Manometer with the liquid

 

 

3) Illustrate a proposed solution to any similar hydraulic problem of your choice, using drawings or models

find the cost of your paper

  Discuss in detail how the mechanical and magnetic properties of nanomaterials vary with particle size.

1.       Explain with a suitable example, the synthesis of nanostructured materials employing self-assembly, self-organisation and template-based methods. 2.       Discuss in detail how the mechanical and magnetic properties of nanomaterials vary….

  Explain the main purpose of interpoles in DC machine.

1.       Explain the main purpose of interpoles in DC machine. 2.       Why tapering of interpoles is carried out in a DC machine? 3.       Provide the specifications of DC machine. 4.      ….

Discuss about “active copper” and “inactive copper” in the design of DC machine.

1.       Mention the location and use of compensating winding in DC machine. Compensating winding is placed under the pole shoe of DC machine that is used to prevent the distortion….