## Determine the drain spacing so that the water table does not build up more than 1 foot above the drain.

For the pipe drains of Problem 17.8 on the impervious surface, the length of drain is 8300 ft. The average water-table gradient is 0.008. Determine the peak discharge due to deep percolation and upland slope and the size of the drain for n = 0.011.

Problem 17.8

If the drains in Problem 17.7 are located on the impervious surface, determine the spacing of the drains so that the water table does not rise more than 2 ft above the drains.

Problem 17.7

The following conditions were observed for an agricultural drainage system.

1. Vertical distance from impervious layer to drains = 30 ft

2. Maximum water table above drains = 6 ft

3. Average hydraulic conductivity = 7.5 in./hr

4. Infiltration rate = 3 in./hr

5. Runoff = 40%

6. Irrigation schedule as per the following table

Determine the drain spacing so that the water table does not build up more than 1 foot above the drain.

### Discuss in detail how the mechanical and magnetic properties of nanomaterials vary with particle size.

1.       Explain with a suitable example, the synthesis of nanostructured materials employing self-assembly, self-organisation and template-based methods. 2.       Discuss in detail how the mechanical and magnetic properties of nanomaterials vary….

### Explain the main purpose of interpoles in DC machine.

1.       Explain the main purpose of interpoles in DC machine. 2.       Why tapering of interpoles is carried out in a DC machine? 3.       Provide the specifications of DC machine. 4.      ….

### Discuss about “active copper” and “inactive copper” in the design of DC machine.

1.       Mention the location and use of compensating winding in DC machine. Compensating winding is placed under the pole shoe of DC machine that is used to prevent the distortion….