## Describe how this circuit models the system. (5 points) Hint 0 14 in the circuit models the viscous damper and /4 models the rotor’s moment of inertia Hint 1 To help you with deriving equivalences.

We now want to create an RL iresistor inductor and sources) circuit that reflects the dynamics of the DC motor including both the electrical and mechanical components To do this we need to find the equivalent circuit of the mechanical part This circuit is in the of node). asc file
1.2.1. Describe how this circuit models the system. (5 points) Hint 0 14 in the circuit models the viscous damper and /4 models the rotor’s moment of inertia Hint 1 To help you with deriving equivalences. it may be useful to note that another term for voltage is electromotive force Hint 2 If you have not consulted it yet. the Newton’s second link contains a lot of information

### design suitable bearings to support the load for at least 5E8 cycles at 1 200 rpm using deepgroove ball bearings.

The shaft shown in Figure P11-4 was designed in Problem 10-19. For the data in row (a) of Table P11-1, and the corresponding diameter of shaft found in Problem 10-19,….

### Find the minimum film thickness for a long bearing with the following data: 30-mm dia, 130 mm long, 0.0015 clearance ratio, 1 500 rpm, ISO VG 100 oil at 200°F, and supporting a load of 7 kN.

1.       A paper machine processes rolls of paper having a density of 984 kg/m3. The paper roll is 1.50-m OD X 22-cm ID X 3.23-m long and is on a simply supported, 22-cm OD, steel….

### Find the minimum film thickness for a bearing with these data: 30-mm dia, 25 mm long, 0.0015 clearance ratio, 1 500 rpm, ON = 30, ISO VG 220 oil at 200°F.

1.       Problem 7-12 estimated the volume of adhesive wear to expect from a steel shaft of 40 mm dia rotating at 250 rpm for 10 years in a plain bronze….