describe each name or special term used in the analysis, which includes process names, data flow names, control flow names etc. If you think further information is required make reasonable assumptions and clearly state these in the submission.

Your task is to do a Real-Time Structured Analysis for the RMT considering the aforementioned steps
and the Special Remark. You are to present your analysis including the following information:
1. An External Entity-Relationship Diagram (ERD) indicating relationships of the RMT and the
other external entities in the system.
2. Data and Control Flow Diagrams (DFD/CFDs) – to sufficient detail that only a single task is
carried out by each process at the lowest level. You should show the control events that occur
on the same diagrams. Use the real-time extensions for control flows etc. shown in the lecture
notes. You need to determine when and where events will occur. For example, whenever a
piece of data becomes available it may need a control event to let the system know that it is
available. These events must be clearly shown in these DFD/CFD diagrams and then handled in
the Control Specification (CSPEC).
3. Control Specifications (Cspec) – use combinational or sequential FSMs as required,
presented in an appropriate format. The idea is that the Cspec will completely describe how
each and every event or control flow is handled in the system. Note you need to provide both
“Process Activation Table” and “State Machine Diagram”.
4. A Data Dictionary is required to adequately describe each name or special term used in the
analysis, which includes process names, data flow names, control flow names etc. If you think
further information is required make reasonable assumptions and clearly state these in the
submission.

find the cost of your paper

set up and solve a case-study example of the light-intensity distribution in a photochemical reactor.

Photochemical reactor modeling: a case-study problem. Although radiation is important in heat transfer, an analogous model can be used in the design of photochemical reactors. The modeling of these reactors….

Write a critique on this technique of secondary-emission measurement.

Secondary-emission measurement: a case-study problem. An indirect way of measuring of secondary emission from ponds or large bodies of water used in waste treatment is to measure the concentration and….

set up a mass transfer model and evaluate the variation of the local mass transfer coefficient at various locations in the plate.

Chemical vapor deposition (CVD) on an inclined susceptor: a case-study problem. An important application of convective mass transfer theory is in CVD processes employed to coat surfaces with thin films….