## Copy and complete the following passage with the most appropriate words, symbols or equations.

Copy and complete the following passage with the most appropriate
words, symbols or equations.
When graphing ?? = 3 sec 0.5??, the period is _______________. An
appropriate interval is ____________, and the asymptotes occur in this
interval where _________________. Thus, the asymptotes in this interval are
?? = ?? and _____________. We can define an inverse sine function on a
restricted domain. The inverse sine function is the function ??????-1 with the
domain ____________and range _______________ defined by ??????-1 ?? = ?? if
and only if _________________. The inverse sine function is also called
______________ denoted by ______________. Thus ?? = ??????-1 ?? is the number
in the interval ________________ whose sin is _________________. In fact from
the general properties of inverse function, we have the following
cancellation properties. ?????? (??????-1 ??)?? for ________________ and
??????-1
(sin ??) = ?? for _________________.

### design suitable bearings to support the load for at least 5E8 cycles at 1 200 rpm using deepgroove ball bearings.

The shaft shown in Figure P11-4 was designed in Problem 10-19. For the data in row (a) of Table P11-1, and the corresponding diameter of shaft found in Problem 10-19,….

### Find the minimum film thickness for a long bearing with the following data: 30-mm dia, 130 mm long, 0.0015 clearance ratio, 1 500 rpm, ISO VG 100 oil at 200°F, and supporting a load of 7 kN.

1.       A paper machine processes rolls of paper having a density of 984 kg/m3. The paper roll is 1.50-m OD X 22-cm ID X 3.23-m long and is on a simply supported, 22-cm OD, steel….

### Find the minimum film thickness for a bearing with these data: 30-mm dia, 25 mm long, 0.0015 clearance ratio, 1 500 rpm, ON = 30, ISO VG 220 oil at 200°F.

1.       Problem 7-12 estimated the volume of adhesive wear to expect from a steel shaft of 40 mm dia rotating at 250 rpm for 10 years in a plain bronze….