build the Maryland State Police Vehicle of Interest user interface, your first assignment will be to create a design document for the desktop part of the application.

Description: In your job to build the Maryland State Police Vehicle of Interest user interface,
your first assignment will be to create a design document for the desktop part of the application.
This will be used by users at the headquarters. Make sure to review the Vehicles of Interest
Introduction document that outlines the major features of the application.
Your Assignment: Your assignment is to create a User Interface Design Document for this
desktop part of the application. Take the template User Interface Design Template and complete
it for your design. You are encourages to used Pencil GUI Designer for screen mockups.
Your design is expected to conform to good design standards. These were taught in SWEN 651
Usability Engineering.

find the cost of your paper

set up and solve a case-study example of the light-intensity distribution in a photochemical reactor.

Photochemical reactor modeling: a case-study problem. Although radiation is important in heat transfer, an analogous model can be used in the design of photochemical reactors. The modeling of these reactors….

Write a critique on this technique of secondary-emission measurement.

Secondary-emission measurement: a case-study problem. An indirect way of measuring of secondary emission from ponds or large bodies of water used in waste treatment is to measure the concentration and….

set up a mass transfer model and evaluate the variation of the local mass transfer coefficient at various locations in the plate.

Chemical vapor deposition (CVD) on an inclined susceptor: a case-study problem. An important application of convective mass transfer theory is in CVD processes employed to coat surfaces with thin films….